A regression approach for estimation of anthropogenic heat flux based on a bottom-up air pollutant emission database

作者：Lee Sang Hyun^*; McKeen Stuart A; Sailor David J

来源：Atmospheric Environment, 2014, 95: 629-633.

DOI：10.1016/j.atmosenv.2014.07.009

• Anthropogenic heat
• Energy balance
• Urban heat islands
• Urban modeling
• Waste heat

A statistical regression method is presented for estimating hourly anthropogenic heat flux (AHF) using an anthropogenic pollutant emission inventory for use in mesoscale meteorological and air-quality modeling. Based on bottom-up AHF estimated from detailed energy consumption data and anthropogenic pollutant emissions of carbon monoxide (CO) and nitrogen oxides (NOx) in the US National Emission Inventory year 2005 (NEI-2005), a robust regression relation between the AHF and the pollutant emissions is obtained for Houston. This relation is a combination of two power functions (Y = aX(b)) relating CO and NOx emissions to AHF, giving a determinant coefficient (R-2) of 0.72. The AHF for Houston derived from the regression relation has high temporal (R = 0.91) and spatial (R = 0.83) correlations with the bottom-up AHF. Hourly AHF for the whole US in summer is estimated by applying the regression relation to the NEI-2005 summer pollutant emissions with a high spatial resolution of 4-km. The summer daily mean AHF range 10-40 W m(-2) on a 4 x 4 km(2) grid scale with maximum heat fluxes of 50-140 W m(-2) for major US cities. The AHFs derived from the regression relations between the bottom-up AHF and either CO or NOx emissions show a small difference of less than 5% (4.7 W m(-2)) in city-scale daily mean AHF, and similar R-2 statistics, compared to results from their combination. Thus, emissions of either species can be used to estimate AHF in the US cities. An hourly AHF inventory at 4 x 4 km(2) resolution over the entire US based on the combined regression is derived and made publicly available for use in mesoscale numerical modeling.

• 出版日期2014-10