Adaptive interrogation for 3D-PIV

作者：Novara Matteo^*; Ianiro Andrea; Scarano Fulvio

来源：Measurement Science and Technology, 2013, 24(2): 024012.

DOI：10.1088/0957-0233/24/2/024012

• 3D-PIV
• Tomo-PIV
• non-isotropic interrogation
• spatial resolution
• adaptive interrogation
• jet flow
• turbulent boundary layer

A method to adapt the shape and orientation of interrogation volumes for 3D-PIV motion analysis is introduced, aimed to increase the local spatial resolution. The main application of this approach is the detailed analysis of complex 3D and vortex-dominated flows that exhibit high vorticity in confined regions like shear layers and vortex filaments. The adaptive criterion is based on the analysis of the components of the local velocity gradient tensor, which returns the level of anisotropy of velocity spatial fluctuations. The principle to increase the local spatial resolution is based on the deformation of spherical isotropic interrogation regions, obtained by means of Gaussian weighting, into ellipsoids, with free choice of the principal axes and their directions. The interrogation region is contracted in the direction of the maximum velocity variation and elongated in the minimum one in order to maintain a constant interrogation volume. The adaptivity technique for three-dimensional PIV data takes advantage of the 3D topology of the flow, allowing increasing the spatial resolution not only in the case of shear layers, but also for vortex filaments, which is not possible for two-dimensional measurement in the plane normal to the vortex axis. The definition of the ellipsoidal interrogation region semi-axes is based on the singular values and singular directions of the local velocity gradient tensor as obtained by the singular values decomposition technique (SVD). The working principle is verified making use of numerical simulations of a shear layer and of a vortex filament. The application of the technique to data from a Tomo-PIV experiment conducted on a round jet, shows that the resolution of the shear layer at the jet exit can be considerably improved and an increase of about 25% in the vorticity peak is attained when the adaptive approach is applied. On the other hand, the peak vorticity description in the core of vortex rings is only slightly improved with approximately a 5% increase in the peak value. Results are in good agreement with the values obtained by means of the numerical simulations. From experiments conducted on a turbulent boundary layer it is observed that the strong curvature of the mean profile is better captured with adapted ellipsoidal interrogation and the amplitude of the spurious oscillation in the vorticity profile observed in the proximity of the wall (ringing) is reduced by nearly a factor 2 after the adaptive interrogation is applied.

• 出版日期2013-2