科研之友
微信
新浪微博
Facebook
分享链接
摘要
Turbo machinery is an essential part in the power generation cycle. However, it is the main source of noise that annoys workers and users, and contributes to environmental problems. Thus, it is important to reduce this noise when operating the power generation cycle. This noise is created by a flow instability on the trailing edge of the rotor blade-an airfoil that becomes a section of the rotor blade of the rotating machine-manufactured as a blunt trailing edge (T.E.), with a round or flatback shape, rather than the ideal sharp T.E. shape, for the purposes of production and durability. This increases the tonal noise and flow-induced vibrations at a low frequency, owing to vortex shedding behind T.E. when compared with a sharp T.E. In order to overcome this problem, the present study investigates the oblique T.E. shape using numerical simulations. In order to do so, flow was simulated using large eddy simulation (LES) and the noise was analyzed by acoustic analogy coupled with the LES result. Once the simulation results were verified using the flatback airfoil measurements of the Sandia National Laboratories, numerical prediction was performed to analyze the flow and the noise characteristics for the airfoils, which were modified to have oblique trailing edge angles of 60 degrees, 45 degrees, and 30 degrees. From the simulation results of the oblique T.E. airfoil, it could be seen that the vortex shedding frequency moves in accordance with the oblique angle and that the vortex shedding noise characteristics change according to the angle, when compared to the flatback T.E. airfoil. Therefore, it is considered that modifying the flatback T.E. airfoil with an appropriate oblique angle can reduce noise and change the tonal frequency to a bandwidth that is suitable for mechanical systems.
- 出版日期2017-7
