Aerodynamic roughness parameters in cities: Inclusion of vegetation

作者：Kent Christoph W^*; Grimmond Sue; Gatey David

来源：Journal of Wind Engineering and Industrial Aerodynamics, 2017, 169: 168-176.

DOI：10.1016/j.jweia.2017.07.016

• Aerodynamic roughness length
• Drag coefficient for vegetation
• Logarithmic wind profile
• Morphometric method
• Urban
• Zero-plane displacement

A widely used morphometric method (Macdonald et al. 1998) to calculate the zero-plane displacement (z(d)) and aerodynamic roughness length (z(0)) for momentum is further developed to include vegetation. The adaptation also applies to the Kanda et al. (2013) morphometric method which considers roughness-element height variability. Roughness-element heights (mean, maximum and standard deviation) of both buildings and vegetation are combined with a porosity corrected plan area and drag formulation. The method captures the influence of vegetation (in addition to buildings), with the magnitude of the effect depending upon whether buildings or vegetation are dominant and the porosity of vegetation (e.g. leaf-on or leaf-off state). Application to five urban areas demonstrates that where vegetation is taller and has larger surface cover, its inclusion in the morphometric methods can be more important than the morphometric method used. Implications for modelling the logarithmic wind profile (to 100 m) are demonstrated. Where vegetation is taller and occupies a greater amount of space, wind speeds may be slowed by up to a factor of three.

• 出版日期2017-10