A reconfigurable LNA with single switched input matching network for S-band (WiMAX/WLAN) applications

作者：Eslahi Hossein^*; Jalali Ali; Nateghi Saman; Mazloum Jalil

来源：MICROELECTRONICS JOURNAL, 2015, 46(10): 956-962.

DOI：10.1016/j.mejo.2015.06.017

• Reconfigurable LNA
• Noise figure
• Power consumption
• Input and output matching
• Discrete tuning
• Frequency bands

In this paper a reconfigurable Low Noise Amplifier (LNA) which works at 2.4 GHz and 3.5 GHz frequency bands is presented. In discrete approach for designing reconfigurable circuits the switch is an undeniable part. But the number of switches can make many problems such as amount of noise factor. Here, a LNA has been introduced which has only one switch and is designed with discrete tuning technique that can show good performance at mentioned frequencies. Besides, the input matching network uses a circuit that presents relatively fixed real part in input impedance, and therefore, input matching is satisfied. Using current reuse technique causes the overall gain is set in high amount. LNA is designed using 0.18 mu m CMOS technology and results of simulator express that its gain is 20.07 dB and 21.08 dB, s(11) is -22.8 dB and -28.86 dB, s(22) has -18.16 dB and -27.37 dB values, NF is 2.6 dB and 3.1 dB, and IP3 is equal to -2 dB m and -2.1 dB m in 2.4 GHz and 3.5 GHz, respectively. The proposed LNA consumes 11 mA from a 1.8 V supply voltage.

• 出版日期2015-10