Determination of optimum injection flow rate to achieve maximum micro bubble drag reduction in ships; an experimental approach

作者：Sayyaadi H^*; Nematollahi M

来源：Scientia Iranica, 2013, 20(3): 535-541.

DOI：10.1016/j.scient.2013.05.001

• Drag reduction
• Micro bubble
• Turbulent boundary layer
• Air injection flow rate
• Experimental model test

Reduction in ship resistance, in order to decrease fuel consumption and also achieve higher speeds, has been the topic of major research over the last three decades. One of the most attractive ideas in this field is micro bubble drag reduction, which attempts to obtain optimum injection flow rate based on ship specifications. The model test results of a 70 cm catamaran model was used to quantify the effect of air injection rate on drag reduction, and to estimate a simple formulation for calculating an efficient injection rate by considering the main parameters of the ship, such as: length, width and speed. The test results show that excessive air injection decreases the drag reduction effect, while suitable injection reduces total drag by about 5%-8%.

• 出版日期2013-6