科研之友
微信
新浪微博
Facebook
分享链接
摘要
The present study aims to elucidate the anisotropic characteristics in material responses for crystallographic nickel substrates with (001), (011) and (111) surface orientations during nanoindentation. Molecular dynamic simulation is applied to compensate for the experimental limitation of nanoindentation, particularly for pure nickel substrates. Defect nucleation and evolution in Ni single crystal of these three crystal orientations was examined. Hardness and Young's modulus are also extracted in different orientations. The Young's modulus of (111) crystallographic orientation is the largest, while that of (001) surface is the smallest. The sensitivity of the yield point for face centred cubic crystals depends on the crystallographic orientation. The (001) crystallographic orientation reaches the yield point first, while the (111) crystallographic orientation is the most difficult in which to achieve yield. Using a visualisation method of centrosymmetry parameter, the homogeneous nucleation and early evolution of dislocations were investigated, deepening understanding of incipient plasticity at the atomic scale. The present results suggest that defect nucleation and evolution are the root of curve jitter. The indentation depth of the elastic-plastic transition point varies in the different crystallographic orientation models, and appears latest in the (111) model. The strain energy of the substrate exerted by the tip is stored by the formation of homogeneous nucleation and is dissipated by the dislocation slide in the {111} glide plane. The three nickel substrates with different crystallographic orientations exhibit different forms of dislocation propagation.
- 出版日期2015-2
- 单位同济大学; 西北工业大学; 中国航空综合技术研究所
