Blade resonance parameter identification based on tip-timing method without the once-per revolution sensor

作者：Guo, Haotian; Duan, Fajie^*; Zhang, Jilong

来源：Mechanical Systems and Signal Processing, 2016, 66-67: 625-639.

DOI：10.1016/j.ymssp.2015.06.016

• Blade tip-timing
• Blade vibration
• Parameter identification

Blade tip-timing is the most effective method for blade vibration online measurement of turbomachinery. In this article a synchronous resonance vibration measurement method of blade based on tip-timing is presented. This method requires no once-per revolution sensor which makes it more generally applicable in the condition where this sensor is difficult to install, especially for the high-pressure rotors of dual-rotor engines. Only three casing mounted probes are required to identify the engine order, amplitude, natural frequency and the damping coefficient of the blade. A method is developed to identify the blade which a tip-timing data belongs to without once-per revolution sensor. Theoretical analyses of resonance parameter measurement are presented. Theoretic error of the method is investigated and corrected. Experiments are conducted and the results indicate that blade resonance parameter identification is achieved without once-per revolution sensor.

• 出版日期2016-1
• 单位天津大学