Building energy performance analysis by an in-house developed dynamic simulation code: An investigation for different case studies

作者：Buonomano Annamaria^*; Palombo Adolfo

来源：Applied Energy, 2014, 113: 788-807.

DOI：10.1016/j.apenergy.2013.08.004

• Building energy performance analysis
• DETECt simulation
• Heating and cooling demand and load
• Dynamic temperature and heat fluxes profiles

A novel dynamic simulation model for the building envelope energy performance analysis is presented in this paper. This tool helps the investigation of many new building technologies to increase the system energy efficiency and it can be carried out for scientific research purposes. In addition to the yearly heating and cooling load and energy demand, the obtained output is the dynamic temperature profile of indoor air and surfaces and the dynamic profile of the thermal fluxes through the building elements. The presented simulation model is also validated through the BESTEST standard procedure.
Several new case studies are developed for assessing, through the presented code, the energy performance of three different building envelopes with several different weather conditions. In particular, dwelling and commercial buildings are analysed. Light and heavyweight envelopes as well as different glazed surfaces areas have been used for every case study. With the achieved results interesting design and operating guidelines can be obtained. Such data have been also compared vs. those calculated by TRNSYS and EnergyPlus. The detected deviation of the obtained results vs. those of such standard tools are almost always lower than 10%.

• 出版日期2014-1