摘要

The development of automated monitoring systems for the detection of singularities, such as leakages in dikes, is indispensable to avoid mass disaster. An efficient solution for dike survey is the use of distributed temperature sensors (DTSs) based on optical fiber, offering a multitude of advantages such as low cost, extreme robustness, long-range measurement, etc. However, the temperature data acquired with DTSs, being not directly interpretable, require intervention of signal processing techniques. This paper addresses this signal processing aspect, exploiting the key idea that the temperature variations over the course of a day for singular zones are quite different from those for nonsingular zones. A daily reference temperature variation, which is representative of the nonsingular zones, is estimated using singular value decomposition (SVD). The residue subspace of SVD contains information linked to the deviations from this reference, thus allowing the degree of singularity to be quantified by a dissimilarity measure such as the L(2)-norm. To detect only the singularities in dikes, such as leakages or drains, a constant false alarm rate (CFAR) detector is proposed by modeling each daily dissimilarity measure with a mixture of Gamma and uniform distributions. The proposed automatic singularity detection system was validated under different scenarios on real data over periods from 2005 to 2007. The first scenario depicted the detection of percolation-type artificial leakages with their detection strength depending on their flow rates. Another scenario allowed detecting the presence of a real water leakage at the site, which was previously unobserved during manual inspections. The repeatability of the system was also verified by periodic analysis.

  • 出版日期2010-8