A cutting sequence optimization algorithm to reduce the workpiece deformation in thin-wall machining

作者：Wang Jun; Ibaraki Soichi^*; Matsubara Atsushi

来源：Precision Engineering-journal of the International Societies for Precision Engineering and Nanotechnology, 2017, 50: 506-514.

DOI：10.1016/j.precisioneng.2017.07.006

• Thin wall
• Cutting process
• Tool path
• Displacement
• CAM (computer-aided manufacturing)

A thin-wall part of lower stiffness can be subject to significant deformation during its cutting process. This study proposes a cutting process optimization algorithm to reduce the workpiece deformation. First, the volume to be removed is divided into a set of blocks. The proposed algorithm starts from the finished workpiece shape, with all the blocks removed. The objective of the proposed algorithm is to find a sequence of adding the blocks, such that the workpiece deformation is always smaller than the given threshold value when the cutting forces is imposed at each step. The workpiece deformation at each step is simulated by using the FEM (finite element method) simulation. By inverting the sequence of adding the blocks, the optimized sequence to remove the blocks can be obtained. Additionally, the block size can be modified to reduce the axial depth of cut to further reduce the workpiece deformation, or to increase the radial depth of cut to enhance the efficiency. Experiments are conducted to confirm the effectiveness of the algorithm to reduce the maximum workpiece deformation during the entire cutting process.

• 出版日期2017-10