Study on flow instability for feasibility of a thin liquid film first wall

作者：Okino Fumito^*; Kasada Ryuta; Konishi Satoshi

来源：Fusion Engineering and Design, 2014, 89(7-8): 1054-1058.

DOI：10.1016/j.fusengdes.2014.01.047

• Liquid film
• First wall
• Instability
• Ambient gas
• Pb-17Li
• Evaporation

This study proposes a probability of the evaporated gas that agitates a growing instability wave in a thin liquid film first wall. The liquid first wall was considered to be in vacuum and the effect of the ambient gas was neglected but the evaporated gas by the high energy fluxes is a probable cause of unstable wave agitation. The criterion is approximately expressed by the density ratio (Q(2)) and the Weber number (We) as Q(2) x We(0.5) approximate to 5 x 10(-4). Performed indirect experimental supported this criterion. For a case study of liquid Pb-17Li film with a velocity of 10 m/s, the evaporated gas pressure must be below 6.2 x 10(3) Pa to maintain stable conditions. By recent study, this pressure is generated at 1600 K temperature and it is believed to be attainable by the energy fluxes on the first wall. This result is so far not confirmed so the full verification by experimental is to be performed.

• 出版日期2014-10