科研之友
微信
新浪微博
Facebook
分享链接
摘要
Stiction, which results from contact between surfaces, is a major failure mode in microelectromechanical systems (MEMS). Indeed, microscopic structures tend to adhere to each other when their surfaces come into contact and when the restoring forces are unable to overcome the interfacial forces. Since incidental contacts cannot be completely excluded and since contacts between moving parts can be part of the normal operation of some types of MEMS, stiction prediction is an important consideration when designing micro- and nanodevices. In this paper, amicro-macro multiscale approach is developed in order to predict possible stiction. At the lower scale, the unloading adhesive contact-distance curves of two interacting rough surfaces are established based on a previously presented model [L. Wu et al., J. Appl. Phys. 106, 113502, 2009]. In this model, dry conditions are assumed, and only the van der Waals forces as adhesion source are accounted for. The resulting unloading adhesive contact-distance curves are dependent on the material, surface properties such as elastic modulus and surface energy, and rough surface topography parameters (the standard deviation of asperity heights and the asperity density). At the higher scale, a finite element analysis is considered to determine the residual cantilever beam configuration due to the adhesive forces once contact happens. Toward this end, the adhesive contact-distance curve computed previously is integrated on the surface of the finite elements as a contact law. The effects of the design parameters can then be studied for the given material and surface properties.
- 出版日期2011-8
- 单位西北工业大学
