A multiple-degree-of-freedom piezoelectric energy harvesting model

作者：Tang Lihua; Yang Yaowen^*

来源：Journal of Intelligent Material Systems and Structures, 2012, 23(14): 1631-1647.

DOI：10.1177/1045389X12449920

• piezoelectric
• energy harvesting
• multiple degrees of freedom
• resonance
• broadband

Conventional vibration energy harvesters have been usually studied as single-degree-of-freedom models. The fact that such harvesters are only efficient near sole resonance limits their applicability in frequency-variant or random vibration scenarios. In this article, a novel multiple-degree-of-freedom piezoelectric energy harvesting model is presented. First, a two-degree-of-freedom model is analyzed, and its two configurations are characterized. In the first configuration, the piezoelectric element is placed between one mass and the base, and in the second configuration, it is placed between the two masses. It is shown that the former is advantageous over the latter since with a slight increase of overall weight to the single-degree-of-freedom model, we can achieve two close and effective peaks in power response or one effective peak with significantly enhanced magnitude. The first configuration is then generalized to an n-degree-of-freedom model, and its analytical solution is derived. This solution provides a convenient tool for parametric study and design of a multiple-degree-of-freedom piezoelectric energy harvesting model. Finally, the equivalent circuit model of the proposed n-degree-of-freedom piezoelectric energy harvesting model is developed via the analogy between the mechanical and electric domains. With the equivalent circuit model, system-level electric simulation can be performed to evaluate the system performance when sophisticated interface circuits are attached.

• 出版日期2012-9
• 单位南阳理工学院