Monitoring polycyclic aromatic hydrocarbons in seawaters and wastewaters using a dispersive liquid-liquid microextraction method

作者：Ramos Dorta Carmen V; Pino Veronica; Afonso Ana M^*

来源：Environmental Technology, 2013, 34(5): 607-616.

DOI：10.1080/09593330.2012.710255

• polycyclic aromatic hydrocarbons
• environmental waters
• dispersive liquidliquid microextraction
• matrix effects
• gas-chromatography

An evaluation has been made of a dispersive liquidliquid microextraction (DLLME) procedure for the determination of 16 polycyclic aromatic hydrocarbons (PAHs) in different environmental waters including seawaters and wastewaters, using gas-chromatography (GC) with flame-ionization detection (FID). The optimized method requires 18L of the extractant solvent tetrachloroethylene (C2Cl4), 1mL of acetonitrile as dispersive solvent, and 5mL of aqueous sample. After centrifugation (5min), 2L of the obtained micro-droplet containing the extracted PAHs, which varied from approximate to 15L for seawaters to approximate to 9L for wastewaters, is directly injected in the GC-FID. The performance of the method is characterized for average extraction efficiencies of 99.0% and 98.1% when analysing real seawaters and wastewaters, respectively, at low spiked levels (3ngmL(1)); and average precision values of 8.4% as relative standard deviation. The performance of the method was also compared with conventional liquidliquid extraction. The DLLME calibrations have been obtained in different aqueous matrices to thoroughly evaluate the matrix effect. The application of the joint-confidence ellipse F-test showed that seawaters can be simply analysed using DLLME calibrations obtained in the laboratory using deionized water. However, important caution must be taken into account when dealing with wastewater, because of matrix effects.

• 出版日期2013-3-1