科研之友
微信
新浪微博
Facebook
分享链接
摘要
Two designs of diamond quarter-wave plates for CO2 lasers, based on the birefringence of sub-wavelength gratings, were manufactured and tested. In one design the grating was etched on the surface of a 300 mu m thick polycrystalline diamond substrate. The other consisted of a diamond grating hanging freely in air, suspended at the edges from a silicon frame. The free-hanging design, while more fragile, had several advantages both in terms of fabrication and performance such as a larger grating period, higher transmission, and no need for an antireflective treatment of the backside.
- 出版日期2016-6-1
