科研之友
微信
新浪微博
Facebook
分享链接
摘要
Due to the disadvantages of the current smart Geogrid for geotechnical use only being able measure strain and evaluate load location, a smart Geogrid embedded with fiber Bragg grating (FBG) sensors has been developed. Also, a deformation reconstruction technique has been investigated, which enables the newly designed smart Geogrid to evaluate the deformation fields of the key areas in geotechnical structures. After the fabricating process of the FBG embedded smart Geogrid was briefly introduced, a curvature information based deformation reconstruction method for the smart Geogrid was detailed. In order to optimize the distribution of the FBG nodes in the smart Geogrid, the finite element (FE) simulation data of the three possible causes of deformation were extracted, and the reconstruction results of the four distributions were compared. The results indicated that equidistantly distributed FBG sensors at the ribs of the smart Geogrid were the optimal distribution for the newly designed smart Geogrid. In addition, a modified deformation reconstruction technique was proposed to reduce reconstruction errors due to the stress concentration on the junctions of the smart Geogrid. The modified method, which employs FBG measured strains for calculating the deformation of the ribs and weighted strains to compute the coordinates of the two junctions, was validated by FE simulations. The simulation results illustrated that the modified method can improve the deformation reconstruction accuracy for both a Geogrid embedded with one fiber optic cable into one warp thread and a Geogrid embedded with multiple fiber optic cables in different warp threads. For the purpose of verifying the feasibility of the deformation measurements for the designed smart Geogrid using the proposed reconstruction techniques, experiments for the smart Geogrid embedded with one fiber optic cable were conducted in constant temperature environments. The curvatures of the smart Geogrid were calibrated prior to the deformation experiments in order to remove the errors induced by the strain measurement. The experimental results demonstrated that the reconstruction technique for the newly designed smart Geogrid was capable of evaluating the deformation field, and the modified reconstruction technique was able to effectively improve the reconstruction accuracy in order to fulfill the requirements of geotechnical usages. The newly developed smart Geogrid with deformation reconstruction techniques can be a promising smart Geosynthetic for the reinforcement as well as the monitoring of geotechnical engineering-related applications.
- 出版日期2015-12
- 单位山东大学; 南阳理工学院
