科研之友
微信
新浪微博
Facebook
分享链接
摘要
Self-centering buckling-restrained braces (SCBRBs) were proposed recently to minimize residual deformation of the braces induced by yielding or buckling. Although earthquake resilience of structures equipped with the SCBRBs can be well achieved using displacement based designs (DBDs), previously proposed DBD procedures generally involve iterations. In this study, a novel direct displacement-based design method with a non-iterative procedure, named R-C-R DDBD, is proposed and applied to design of steel braced frame structures with SCBRBs. Unlike previously adopted DBD, the yield displacement does not need to be assumed initially in the proposed procedure. Instead, the yield strength and yield displacement are determined directly by the predetermined objective drift (ratio), using the relation of the strength reduction factor (R) and constant-strength inelastic displacement ratio spectra (C-R spectra), i.e. the R-C-R relation. Since the derived R-C-R relation is independent with the peak ground acceleration of the earthquake records when stiffness and strength degradation are not considered, the proposed procedure can be accurate for any seismic level. The R-C-R DDBD is supposed to begin with the knowledge of the seismic excitation level (according to the structure category, site classification and owner's requirements) and the corresponding target drift; the end of the design is to obtain the cross sections of main frame members and all the bracing parameters. The result of two 7-story buildings designed according to the R-C-R DDBD procedure demonstrates that this procedure can be effective and fairly simple for practical seismic design.
