科研之友
微信
新浪微博
Facebook
分享链接
摘要
This paper presents the direct compensation of the switching interval error of the effective voltage vectors by the dead time of a pulsewidth modulation voltage source inverter (PWM-VSI). The output voltages of a three-phase PWM-VSI are distorted and have voltage errors from the dead time to avoid the shoot-through of inverter arms and the time delay of the gate drive. Voltage distortion increases the harmonics of the output voltages and decreases control performance. This paper presents a simple and direct compensation technique to solve this problem in a three-phase VSI. The practical switching output voltages are determined by the dc-link voltage, the switching signals of each phase, the dead time, the time delay, and the current polarities of each phase. For these reasons, output voltage errors are not constant. In order to analyze the dead-time effect in the actual switching voltages of each phase, the practical switching voltages in a sampling period of a space vector PWM (SVPWM) method are calculated according to the current polarity. In the calculation, the dead time, the time delay of devices, and the voltage drops on power devices are included to consider nonlinear voltage distortion. From these practical switching voltages during the switching intervals in a sampling period, the average output voltages of each phase can be derived, and the output voltage errors between the voltage commands and the average output voltages of each phase are obtained. The SVPWM switching intervals of each phase can be derived by the average output voltages that are calculated according to the current polarity and nonlinear voltage distortion to compensate for the output voltage errors. With the simple detection of the current polarity, the practical errors of the switching intervals of each phase can be compensated by the addition of the compensated switching time. Simulation and experimental results validating the proposed compensation method are presented in this paper.
- 出版日期2014-10
