Austenitic Reversion of Cryo-rolled Ti-Stabilized Austenitic Stainless Steel: High-Resolution EBSD Investigation

作者：Tiamiyu A A^*; Odeshi A G; Szpunar J A

来源：Journal of Materials Engineering and Performance, 2018, 27(2): 889-904.

DOI：10.1007/s11665-018-3180-6

• carbide precipitation
• EBSD
• stainless steel
• straininduced phase transformation
• texture memory
• thermo-mechanical processing

In this study, AISI 321 austenitic stainless steel (ASS) was cryo-rolled and subsequently annealed at 650 and 800 A degrees C to reverse BCC alpha'-martensite to FCC gamma-austenite. The texture evolution associated with the reversion at the selected temperatures was investigated using high-resolution EBSD. After the reversion, TiC precipitates were observed to be more stable in 650 A degrees C-annealed specimens than those reversed at 800 A degrees C. {110}< uvw > texture was mainly developed in specimens subjected to both annealing temperatures. However, specimens reversed at 650 A degrees C have stronger texture than those annealed at 800 A degrees C, even at the higher annealing time. The strong intensity of {110}< uvw > texture component is attributed to the ability of AISI 321 ASS to memorize the crystallographic orientation of the deformed austenite, a phenomenon termed texture memory. The development of weaker texture in 800 A degrees C-annealed specimens is attributed to the residual strain relief in grains, dissolution of grain boundary precipitates, and an increase in atomic migration along the grain boundaries. Based on the observed features of the reversed austenite grains and estimation from an existing model, it is suspected that the austenite reversion at 650 and 800 A degrees C undergone diffusional and martensitic shear reversion, respectively.

• 出版日期2018-2
• 单位Saskatchewan; Saskatoon