A real-time extraction of active and reactive current using microcontrollers for a multipulse STATCOM

作者：Anadol Mehmet Ali^*; Aydin Musa; Yalcinoz Tankut

来源：Turkish Journal of Electrical Engineering and Computer Sciences, 2013, 21(4): 1044-1060.

DOI：10.3906/elk-1106-23

• Flexible AC transmission systems
• microcontroller
• reactive power compensation
• single machine infinite bus
• static synchronous compensator

In power transmission and distribution systems, the design of a compensator that adjusts the power factor without causing additional power losses requires the determination of the reactive current components that are going to be supplied into the system. In this study, the determination of the active and reactive current components is achieved via the use of the nonactive power theory and a microcontroller-based control system. The control system has been implemented with low-cost 16-bit microcontrollers. This system was used to control a 3-phase, 12-pulse laboratory-size prototype of a static synchronous compensator (STATCOM) with the structure of a voltage source converter. Verification of the STATCOM and its control circuit were examined via experiments and simulation studies conducted on a single-machine infinite-bus power transmission system. The simulation models for the power and control systems were built by employing the PSCAD/EMTDC program's C programming interface and the graphics-based models in its model library. The experimental results are compared with the results obtained from the PSCAD/EMTDC simulation program.

• 出版日期2013