科研之友
微信
新浪微博
Facebook
分享链接
摘要
Recently, an inverse design algorithm called ball-spine algorithm (BSA) was introduced for the design of 2D ducts. In this approach, the walls are considered as a set of virtual balls that can move freely along the straight directions called spines. In the present work, the method is developed for quasi-three-dimensional (quasi-3D) design of S-shaped ducts with a predefined width. To do so, the upper and lower lines of the S-duct symmetric section are modified under the BSA and then, the 3D S-duct geometry is obtained based on elliptic cross-sectional profiles. The target pressure distributions (TPDs) along the upper and lower lines are prescribed so that separation does not occur. Finally, the flow through the designed S-duct is numerically analyzed using a viscous flow solver with the SST turbulence model to validate the designed S-duct performance. The performance of the designed S-duct is compared to original and optimized versions of a benchmark S-duct diffuser. Results show that the present S-duct has a better performance.
- 出版日期2014-12
