Multitechnique characterisation of 304L surface states oxidised at high temperature in steam and air atmospheres

作者：Mamede Anne Sophie; Nuns Nicolas; Cristol Anne Lise; Cantrel Laurent^*; Souvi Sidi; Cristol Sylvain; Paul Jean Francois

来源：Applied Surface Science, 2016, 369: 510-519.

DOI：10.1016/j.apsusc.2016.01.185

• Oxidation
• Stainless steel
• XPS
• LEIS
• ToF-SIMS

In case of a severe accident occurring in a nuclear reactor, surfaces of the reactor coolant system (RCS), made of stainless steel (304L) rich in Cr (>10%) and Ni (8-12%), are oxidised. Fission products (FPs) are released from melt fuel and flow through the RCS. A part of them is deposited onto surfaces either by vapour condensation or by aerosol deposition mechanisms. To be able to understand the nature of interactions between these FPs and the RCS surfaces, a preliminary step is to characterize the RSC surface states in steam and air atmosphere at high temperatures. Pieces of 304L stainless steel have been treated in a flow reactor at two different temperatures (750 degrees C and 950 degrees C) for two different exposition times (24 h and 72 h). After surfaces analysing by a unique combination of surface analysis techniques (XPS, ToF-SIMS and LEIS), for 304L, the results show a deep oxide scale with multi layers and the outer layer is composed of chromium and manganese oxides. Oxide profiles differ in air or steam atmosphere. Fe2O3 oxide is observed but in minor proportion and in all cases no nickel is detected near the surface. Results obtained are discussed and compared with the literature data.

• 出版日期2016-4-30