Direct-write planar microultracapacitors by laser engineering

作者：Arnold CB^*; Wartena RC; Swider Lyons KE; Piquea A

来源：Journal of the Electrochemical Society, 2003, 150(5): A571-A575.

DOI：10.1149/1.1563650

We have successfully employed laser direct write and micromachining to fabricate high capacity hydrous ruthenium oxide (RuOxHy or RuO2 . xH(2)O) microultracapacitors. A laser direct-write process is used to deposit uniform pads of RuO2 . 0.5H(2)O in sulfuric acid under ambient temperature and atmospheric conditions. Ultraviolet laser micromachining is used to tailor the shape and size of the deposited material into planar electrodes. The specific capacitance of the laser-deposited materials is comparable to reported values of similar to720 F/g. The microultracapacitors demonstrate linear charge and discharge behavior at currents below 1 mA, as expected for an ideal capacitor. By studying the charge storage and power output as a function of discharge current, the power can be successfully modeled assuming only simple ohmic losses. Parallel and series combinations of these microultracapacitor cells provide the expected addition of capacitance. Maximum discharge currents of 50 mA are applied to two cells in parallel without damage to the microultracapacitor cells. The microultracapacitors exhibit high specific power and specific energy with over 1100 mW/g at approximately 9 mWhr/g for an 80 mug cell with a footprint of 2 mm(2) and a thickness of 15 mm.

• 出版日期2003-5