科研之友
微信
新浪微博
Facebook
分享链接
摘要
The Mars Science Laboratory (MSL) rover, Curiosity, has a titanium science observation tray (o-tray), upon which portions from drilled and scooped Martian samples can be delivered for analyses by the Alpha-Particle X-ray Spectrometer (APXS). The standard APXS calibration approach to derive elemental concentrations cannot be applied to samples on the o-tray because they (1) have a nonuniform three-dimensional distribution within the APXS field of view and (2) are thin (%26lt; 50 mu m) compared to the APXS information depth for heavy elements (%26gt; 90 mu m). To develop techniques for interpreting MSL-APXS o-tray measurements, we conducted laboratory measurements of thin particulate basalt samples on Ti metal with the Flight Equivalent APXS Unit. The experiments demonstrate that, relative to an infinitely thick sample, increasing areal coverage of particulates on a Ti metal substrate results in a proportional decrease in the Ti signal and increase in the sample signal. Count rates for heavier elements (Mn and Fe) drop with decreasing sample thickness because the mean thickness is smaller than the APXS information depth. Similar effects were seen in the MSL-APXS o-tray measurement of Rocknest fines on Martian solar day 95, an aliquot of material delivered to Sample Analysis at Mars and Chemistry and Mineralogy. The thin layer effect caused a drop in Mn and Fe signals, which cannot be quantitatively compared to the in situ Rocknest target Portage because sample thickness was unknown. Otherwise, Rocknest fines on the o-tray had no significant compositional differences from Portage, except for slight increases in S and Cl.
- 出版日期2014-5
