Ultrasound-assisted xanthation of cellulose from lignocellulosic biomass optimized by response surface methodology for Pb(II) sorption

作者：Wang, Chongqing^*; Wang, Hui; Gu, Guohua

来源：Carbohydrate Polymers, 2018, 182: 21-28.

DOI：10.1016/j.carbpol.2017.11.004

• Biosorption
• Cellulose xanthate
• Heavy metal
• Lignocellulosic biomass
• Response surface methodology

Alkali treatment of lignocellulosic biomass is conducted to remove hemi-cellulose and lignin, further increasing the reactivity and accessibility of cellulose. Ultrasound-assisted xanthation of alkali cellulose is optimized by response surface methodology (RSM) with a Box-Behnken design. A predicting mathematical model is obtained by fitting experimental data, and it is verified by analysis of variance. Response surface plots and the contour plots obtained from the model are applied to determine the interactions of experimental variables. The optimum conditions are NaOH concentration 1.3 mol/L, ultrasonic time 71.6 min and CS2 dosage 1.5 mL. FTIR, SEM and XPS characterizations confirm the synthesis and sorption mechanism of cellulose xanthate (CX). Biosorption of Pb (II) onto CX obeys pseudo-second order model and Langmuir model. The sorption mechanism is attributed to surface complexation or ion exchange. CX shows good reusability for Pb (II) sorption. The maximum sorption capacity of Pb(II) is 134.41 mg/g, higher than that of other biosorbents. CX has great potential as an efficient and low-cost biosorbent for wastewater treatment.

• 出版日期2018-2-15
• 单位郑州大学; 中南大学