An improved tensile deformation model for in-situ dendrite/metallic glass matrix composites

作者：Sun, X. H.; Qiao, J. W.^*; Jiao, Z. M.; Wang, Z. H.; Yang, H. J.; Xu, B. S.

来源：Scientific Reports, 2015, 5(1): 13964.

DOI：10.1038/srep13964

• BULK METALLIC GLASSES
• STRAIN GRADIENT PLASTICITY
• SHEAR BANDS
• DUCTILE DENDRITES
• AMORPHOUS-ALLOYS
• SIZE
• MECHANISM
• STRENGTH
• TITANIUM
• INDENTATION

With regard to previous tensile deformation models simulating the tensile behavior of in-situ dendrite-reinforced metallic glass matrix composites (MGMCs) [Qiao et al., Acta Mater. 59 (2011) 4126; Sci. Rep. 3 (2013) 2816], some parameters, such as yielding strength of the dendrites and glass matrix, and the strain-hardening exponent of the dendrites, are estimated based on literatures. Here, Ti48Zr18V12Cu5Be17 MGMCs are investigated in order to improve the tensile deformation model and reveal the tensile deformation mechanisms. The tensile behavior of dendrites is obtained experimentally combining nano-indentation measurements and finite-element-method analysis for the first time, and those of the glass matrix and composites are obtained by tension. Besides, the tensile behavior of the MGMCs is divided into four stages: (1) elastic-elastic, (2) elastic-plastic, (3) plastic-plastic (work-hardening), and (4) plastic-plastic (softening). The respective constitutive relationships at different deformation stages are quantified. The calculated results coincide well with the experimental results. Thus, the improved model can be applied to clarify and predict the tensile behavior of the MGMCs.

• 出版日期2015-9-10
• 单位太原理工大学