An in-fiber Bragg grating sensor for contact force and stress measurements in articular joints

作者：Dennison Christopher R^*; Wild Peter M; Wilson David R; Gilbart Michael K

来源：Measurement Science and Technology, 2010, 21(11): 115803.

DOI：10.1088/0957-0233/21/11/115803

• fiber Bragg grating
• articular joint
• hip
• stress
• biomechanics
• sensor

We present an in-fiber Bragg grating-based sensor (240 mu m diameter) for contact force/stress measurements in articular joints. The contact force sensor and another Bragg grating-based pressure sensor (400 mu m diameter) are used to conduct the first simultaneous measurements of contact force/stress and fluid pressure in intact cadaveric human hips. The contact force/stress sensor addresses limitations associated with stress-sensitive films, the current standard tools for contact measurements in joints, including cartilage modulus-dependent sensitivity of films and the necessity to remove biomechanically relevant anatomy to implant the films. Because stress-sensitive films require removal of anatomy, it has been impossible to validate the mechanical rationale underlying preventive or corrective surgeries, which repair these anatomies, by conducting simultaneous stress and pressure measurements in intact hips. Methods are presented to insert the Bragg grating-based sensors into the joint, while relevant anatomy is left largely intact. Sensor performance is predicted using numerical models and the predicted sensitivity is verified through experimental calibrations. Contact force/stress and pressure measurements in cadaveric joints exhibited repeatability. With further validation, the Bragg grating-based sensors could be used to study the currently unknown relationships between contact forces and pressures in both healthy and degenerated joints.

• 出版日期2010-11