Nonlinear finite element analysis of collapse and post-collapse behaviour in dented submarine pipelines

作者：Ramasamy R^*; Ya T M Y S Tuan

来源：Applied Ocean Research, 2014, 46: 116-123.

DOI：10.1016/j.apor.2014.02.007

• Buckle propagation
• Collapse
• Dented pipe
• Finite element analysis

The venture of oil and gas exploration into deeper waters has increased drastically in these recent years, as the shallow water fields approaching exhaustion. Large diameter pipelines installed in these areas are exposed to the severe pressure loading resulting from the water depth and any pre-installation damages sustained during transportation or pipel ay and may reduce the collapse and buckle propagation resistance drastically. This work focuses on the utilisation and application of the finite element method as a robust and practical engineering tool to establish a methodology for analysing the effects of initial imperfections in the form of dents of various shapes and sizes on pipelines, sustained prior to pipelay, to determine the collapse pressure and buckle propagation pressure which can result in costly abandonments and unnecessary replacements. Comparison between the available theoretical closed-form simplified solutions available via 2D ring analogy, the experimental test conducted by various researchers on steel tubes, empirical formulations from past works and the analysis results obtained from this research were conducted, by incorporating the material plasticity, residual stresses and external pressure. The methodology employed herein provides a relatively realistic and practical assessment tool for computing the collapse and buckle propagation pressures of dented large-diameter submarine pipelines.

• 出版日期2014-6