科研之友
微信
新浪微博
Facebook
分享链接
摘要
A technology for establishing best focus of an optical system is described. This technology was recently used to establish best focus of the Orbiting Carbon Observatory spectrometers while the instrument was undergoing thermal-vacuum testing. Three piezo-actuated motors were used to adjust the tip, tilt, and piston of a focal plane assembly relative to the spectrometer's optical system. A set of optical displacement sensors measured tip-tilt-piston throughout the focusing process. With best focus established and confirmed using a pupil-slicing technique, the corresponding sensor measurements were used to specify the geometry and dimensions of a precision-ground shim ring.
- 出版日期2009-7
