Microbial Leaching of Waste Solder for Recovery of Metal

作者：Hocheng H^*; Hong T; Jadhav U

来源：Applied Biochemistry and Biotechnology, 2014, 173(1): 193-204.

DOI：10.1007/s12010-014-0833-2

• Solders
• Bioleaching
• Aspergillus niger
• Acidithiobacillus ferrooxidans
• Culture supernatant

This study proposes an environment-friendly bioleaching process for recovery of metals from solders. Tin-copper (Sn-Cu), tin-copper-silver (Sn-Cu-Ag), and tin-lead (Sn-Pb) solders were used in the current study. The culture supernatant of Aspergillus niger removed metals faster than the culture supernatant of Acidithiobacillus ferrooxidans. Also, the metal removal by A. niger culture supernatant is faster for Sn-Cu-Ag solder as compared to other solder types. The effect of various process parameters such as shaking speed, temperature, volume of culture supernatant, and increased solder weight on bioleaching of metals was studied. About 99 (+/- 1.75) % metal dissolution was achieved in 60 h, at 200-rpm shaking speed, 30 A degrees C temperature, and by using 100-ml A. niger culture supernatant. An optimum solder weight for bioleaching was found to be 5 g/l. Addition of sodium hydroxide (NaOH) and sodium chloride (NaCl) in the bioleached solution from Sn-Cu-Ag precipitated tin (85 A +/- 0.35 %) and silver (80 A +/- 0.08 %), respectively. Passing of hydrogen sulfide (H2S) gas at pH 8.1 selectively precipitated lead (57.18 A +/- 0.13 %) from the Sn-Pb bioleached solution. The proposed innovative bioleaching process provides an alternative technology for recycling waste solders to conserve resources and protect environment.

• 出版日期2014-5
• 单位清华大学