An optical fiber Fabry-Perot micro-pressure sensor based on beam-membrane structure

作者：Tian, Bian^*; Zhan, Feng; Han, Feng; Li, Kaikai; Zhao, Na; Yang, Ning; Jiang, Zhuangde

来源：Measurement Science and Technology, 2018, 29(12): 125104.

DOI：10.1088/1361-6501/aadfb1

• micro-pressure
• optical fiber sensor
• FP cavity
• beam-membrane structure
• MEMS

In this paper, an optical fiber Fabry-Perot (FP) sensor for micro-pressure measurement is proposed. The FP interferometric cavity is composed of an end face of the incident optical fiber and a sensitive silicon diaphragm. The sensitive silicon diaphragm creatively utilizes a beam-membrane structure which is fabricated by micro-electro-mechanical system manufacturing technology. The finite element method simulation results show that the beam-membrane structure can achieve higher sensitivity and better linearity. The sensor performance test platform is built by a ASE-wide spectrum light source, optical spectrum analyzer, micropressure gas source and so on. The phase demodulation method is employed to demodulate the cavity length signal from the spectrum. The measure range of the sensor is 0-10 KPa, and the experimental sensitivity of the cavity length can reach to 242nm KPa-1.

• 出版日期2018-12
• 单位西安交通大学