Superior Convective Heat Transport for Laminar Boundary Layer Flow Over a Flat Plate Using Binary Gas Mixtures With Light Helium and Selected Heavier Gases

作者：Campo Antonio^*; Chikh Salah; Papari Mohammad M; Mobinipouya Mohammad R

来源：Journal of Heat Transfer-Transactions of the ASME, 2010, 132(5): 051701.

DOI：10.1115/1.4000433

• boundary layers
• carbon compounds
• chemical analysis
• computational fluid dynamics
• density
• drag
• forced convection
• gas mixtures
• helium
• laminar flow
• momentum
• nitrogen
• organic compounds
• oxygen
• specific heat
• sulphur compounds
• thermal conductivity
• viscosity
• xenon

This paper addresses the laminar boundary layer flow of certain binary gas mixtures along a heated flat plate. To form the binary gas mixtures, light helium (He) is the primary gas and the heavier secondary gases are nitrogen (N(2)), oxygen (O(2)), xenon (Xe), carbon dioxide (CO(2)), methane (CH(4)), tetrafluoromethane (CF(4)), and sulfur hexafluoride (SF(6)). The central objective of this paper is to investigate the potential of this group of binary gas mixtures for heat transfer intensification. From fluid physics, two thermophysical properties, i.e., viscosity eta and density rho, influence the fluid flow, whereas four thermophysical properties, i.e., viscosity eta, thermal conductivity lambda, density rho, and heat capacity at constant pressure C(p), affect the forced convective heat transfer. The heat transfer augmentation from the flat plate is pursued by stimulating the forced convection mode as a whole. In this regard, it became necessary to construct a specific correlation equation to handle binary gas mixtures owing Prandtl number Pr is an element of(0.1,1). Whenever there is heat transfer invigoration in forced flow, drag force accretion seems to be inevitable. A standard formula for estimating the drag force F(d) exerted on the flat plate is available from the fluid dynamics literature. The descriptive equations for the heat transfer rate Q(mix) and drag force F(d,mix) associated with the seven binary gas mixtures are channeled through the four thermophysical properties, i.e., density rho(mix), viscosity eta(mix), thermal conductivity lambda(mix), and heat capacity at constant pressure C(p,mix), which depend on the molar gas composition w. Two case studies suffice to elucidate the modified convective heat and momentum transport that the binary gas mixtures bring forward. At a film temperature T(f)=300 K and 1 atm, the He+SF(6) mixture delivers the absolute maximum for the relative heat transfer Q(mix,abs max)/B=16.71 at an optimal molar gas composition w(opt)=0.96. When compared with the light primary He gas with a relative heat transfer rate Q(He)/B=12.04, the He+SF(6) mixture generates a significant heat transfer enhancement of 39%. At a film temperature T(f)=600 K and the same 1 atm, the relative heat transfer Q(He)/B for the light primary gas He comes down to 10.77. In reference to this, the He+SF(6) mixture furnishes an absolute maximum heat transfer Q(mix,abs max)/B=18.11 at an optimal molar gas composition w(opt)=0.96, yielding a remarkable heat transfer enhancement of 68%. In the global context, the usage of exotic binary gas mixtures with light helium and selected heavier gases may be envisioned for special tasks in industries that demand high heat transfer rates.

• 出版日期2010-5