Development of high strength siloxane poly(urethane-urea) elastomers based on linked macrodiols for heart valve application

作者：Dandeniyage Loshini S.; Gunatillake Pathiraja A.^*; Adhikari Raju; Bown Mark; Shanks Robert; Adhikari Benu

来源：Journal of Biomedical Materials Research Part B: Applied Biomaterials , 2018, 106(5): 1712-1720.

DOI：10.1002/jbm.b.33970

• poly(urethane-urea)
• linked-macrodiol
• synthesis
• morphology
• polydimethylsiloxane

Mixed macrodiol based siloxane poly(urethane-urea)s (SiPUU) having number average molecular weights in the range 87-129 kDa/mol were synthesized to give elastomers with high tensile and tear strengths required to fabricate artificial heart valves. Polar functional groups were introduced into the soft segment to improve the poor segmental compatibility of siloxane polyurethanes. This was achieved by linking ,-bis(6-hydroxyethoxypropyl) poly(dimethylsiloxane) (PDMS) or poly(hexamethylene oxide) (PHMO) macrodiols with either 4,4-methylenediphenyl diisocyanate (MDI), hexamethylene diisocyanate (HDI) or isophorone diisocyanate (IPDI) prior to polyurethane synthesis. The hard segment was composed of MDI, and a 1:1 mixture of 1,3-bis(4-hydroxybutyl)-1,1,3,3-tetramethyldisiloxane and 1,2-ethylene diamine. We report the effect of urethane linkers in soft segments on properties of the SiPUU. PHMO linked with either MDI or IPDI produced SiPUU with the highest tensile and tear strengths. Linking PDMS hardly affected the tensile strength; however, the tear strength was improved. The stress-strain curves showed no plastic deformation region typically observed for conventional polyurethanes indicating good creep resistance.

• 出版日期2018-7
• 单位CSIRO