摘要

Two-dimensional elastic or elasto-plastic models dominate the current fatigue crack growth assessment and life prediction procedures for plate components with through-the-thickness cracks. However, as demonstrated in many theoretical and experimental papers, the stress field near the crack tip is always three-dimensional and, as a result, the fatigue crack front is not straight. It is normally curved towards the plate faces. Over the past few years there were a number of very careful numerical studies focusing on the evaluation of fatigue crack front shapes. However, the application of the direct numerical techniques to fatigue phenomena is a very tedious and time consuming process and, sometimes, it is quite ambiguous. In the current paper we develop a simplified method for the evaluation of the front shapes of through-the-thickness fatigue cracks. Further, we validate the developed method against experimental results, investigate the influence of various parameters on the crack front shapes at stable (steady-state) propagation and analyse the differences in the results of fatigue crack growth evaluation obtained with two- and three-dimensional approaches.

  • 出版日期2014-8