Hybrid Composites Based on Carbon Fiber/Carbon Nanofilament Reinforcement

作者：Tehrani Mehran; Boroujeni Ayoub Yari; Luhrs Claudia; Phillips Jonathan; Al Haik Marwan S^*

来源：Materials, 2014, 7(6): 4182-4195.

DOI：10.3390/ma7064182

• carbon fiber
• carbon nanofilaments
• fiber reinforced composites
• mechanical properties

Carbon nanofilament and nanotubes (CNTs) have shown promise for enhancing the mechanical properties of fiber-reinforced composites (FRPs) and imparting multi-functionalities to them. While direct mixing of carbon nanofilaments with the polymer matrix in FRPs has several drawbacks, a high volume of uniform nanofilaments can be directly grown on fiber surfaces prior to composite fabrication. This study demonstrates the ability to create carbon nanofilaments on the surface of carbon fibers employing a synthesis method, graphitic structures by design (GSD), in which carbon structures are grown from fuel mixtures using nickel particles as the catalyst. The synthesis technique is proven feasible to grow nanofilament structures-from ethylene mixtures at 550 degrees C-on commercial polyacrylonitrile (PAN)-based carbon fibers. Raman spectroscopy and electron microscopy were employed to characterize the surface-grown carbon species. For comparison purposes, a catalytic chemical vapor deposition (CCVD) technique was also utilized to grow multiwall CNTs (MWCNTs) on carbon fiber yarns. The mechanical characterization showed that composites using the GSD-grown carbon nanofilaments outperform those using the CCVD-grown CNTs in terms of stiffness and tensile strength. The results suggest that further optimization of the GSD growth time, patterning and thermal shield coating of the carbon fibers is required to fully materialize the potential benefits of the GSD technique.

• 出版日期2014-6
• 单位Virginia Tech; 美国弗吉尼亚理工大学(Virginia Tech)