科研之友
微信
新浪微博
Facebook
分享链接
摘要
Flexible thermoplastic composites hold great potential in the automobile industry due to their high specific strength and modulus, good recyclability and high productivity. In this work, a novel single-layered ultra-thin (<= 0.3 mm thick) carbon-fabric/polycarbonate composite was laminated with two thin polycarbonate (PC) films as the matrix and a woven carbon fabric as reinforcement, adopting a balanced plain weave method combined with a hot-press technique. For the carbon fiber (CF) tow, thousands of filaments are packed with high density in a tape shape so that the permeation resistance of the matrix during hot-press increases, especially for a low molding temperature, inducing poor CF-PC bonding. To address this matter, raw CF tows were spread into a fabric prior toweaving. Three spread CF tows, 8, 14, and 20 mm in width, were used to investigate the effect of the tow width on the tensile strength and impact properties of the as-prepared composites. The experimental results showed that the 20 mm wide tow performed better with respect to normalized tensile strength, shear strength, peak force and penetration energy than the 8 and 14 mm tows, which can be attributed to its enhanced impregnation between the CF and PC matrix.
- 出版日期2017-10-5
- 单位华南理工大学
