Automatic Synthesis of Multimodal Polymers

作者：Leonardi Natalie C R; Montgomery Rick D; Siqueira Julia; McAfee Terry; Drenski Michael F; Reed Wayne F^*

来源：Macromolecular Reaction Engineering, 2017, 11(4): 1600072.

DOI：10.1002/mren.201600072

• ACOMP
• automatic reaction control
• light scattering
• molecular weight distributions
• multimodal polymers

An automatic molecular weight controller is used in semi-batch reactions to produce final polymers that contain distinct subpopulations with different molecular weight distributions (MWD). While blending polymers with different MWD is frequently used to make multimodal polymer products, a method is introduced here allowing the multimodal product to be made in successive, automatically controlled stages in the same reactor. The method is demonstrated using free radical polymerization of acrylamide to produce widely separated multimodal MWD. Automatic Continuous Online Monitoring of Polymerization reactions with a Control Interface (ACOMP/CI) was used. Weight average molecular weight (M-w) in the ACOMP/CI was continuously measured with multi-angle light scattering and ultraviolet absorption. The controller used two principles: both poly-merization rate and instantaneous molecular weight are proportional to mono-mer concentration. By controlling monomer flow rate into the reactor, the controller produced a targeted amount of poly-mer with a desired first Mw and then automatically introduced chain transfer agent (CTA) into the reactor to produce a second population of polymers with much lower Mw. Subsequently, reactions were performed to produce trimodal populations. This approach is kindred to multi-stage synthesis of polymers where distinctly different processes are carried out in succeeding stages to produce poly-mers with highly specific properties.

• 出版日期2017-8