科研之友
微信
新浪微博
Facebook
分享链接
摘要
Very active 40%Ir-10%V-3%Mo/C and 40%Ir-10%V-10%Mo/C (in weight) catalysts, as novel, suitable anode electrode materials in polymer electrolyte membrane fuel cells (PEMFCs), have been synthesized by an ethylene glycol (EG) reduction method. The nanostructured catalysts have been characterized by X-ray diffraction (XRD) and high-resolution transmission electron microscopy (TEM). Ir nanoparticles, after modification with V and further with Mo, show a narrow particle size distribution centered at 2 nm, and are uniformly dispersed on Vulcan XC-72 supports. Investigation of the catalytic activity by means of linear sweep voltammetry (LSV) employing a rotating disk electrode (RDE) has revealed that 40%Ir-10%V-10%Mo/C catalyst exhibited very high electrocatalytic activity toward the hydrogen oxidation reaction (HOR). About 77% higher current density was obtained for 40%Ir-10%V-10%Mo/C compared to that of 40 wt.% commercial carbon-supported platinum catalyst (Pt/C), and 282% higher current density compared to that of the pure 40 wt.% Ir/C at 0.1 V versus RHE. The performance of a membrane electrode assembly (MEA) prepared with the 40%Ir-10%V-10%Mo/C as the anode catalyst generated a maximum power density of 598.4 mW cm(-2) at 70 degrees C, which is 26.4% higher than that of commercially available Pt/C under air/H-2 testing condition. The ternary 40%Ir-10%V-10% Mo/C catalyst was also tested for 10 ppm CO tolerance, and the results showed that the 40% Ir-10%V-10%Mo/C has much better CO tolerance than commercial Pt/C catalyst. The mechanism of the ternary 40%Ir-10%V-10%Mo/C catalyst may be a bi-functional mechanism.
- 出版日期2012-12
- 单位同济大学
