Determination of Young's modulus of epoxy coated polyethylene micro-cantilever using phase-shift shadow moire method

作者：Lim J H; Ratnam M M^*; Azid I A; Mutharasu D

来源：Optics and Lasers in Engineering, 2011, 49(11): 1301-1308.

DOI：10.1016/j.optlaseng.2011.06.005

• Polyethylene terephthalate (PET)
• Phase-shift shadow moire (PSSM)
• Young's modulus

Young's moduli of various epoxy coated polyethylene terephthalate (PET) micro-cantilevers were determined from the deflection results obtained using the phase-shift shadow moire (PSSM) method. The filler materials for epoxy coatings were aluminum and graphite powders that were mixed with epoxy at various percentages. Young's moduli were calculated from theory based on the deflection results. The PET micro-cantilever coated with aluminum-epoxy coating showed increasing value of Young's modulus when the ratios of the aluminum-epoxy were increased. The graphite-epoxy coating on the PET micro-cantilever also showed the same trend. The experimental results also show that Young's modulus of the graphite-epoxy coating is higher than aluminum-epoxy coating in comparison at the same mixing ratio.

• 出版日期2011-11