科研之友
微信
新浪微博
Facebook
分享链接
摘要
Perth is the largest city in Western Australia and home to three-quarters of the state's residents. In recent decades, there have been a lot of earthquake activities just east of Perth in an area known as the South-West Seismic Zone. Previous numerical results of site response analyses based on limited available geology information for PMA indicated that Perth Basin might amplify the bedrock motion by more than 10 times at some frequencies and at some sites. Hence, more detailed studies on site characterization and amplification are necessary. The microtremor method using spatial autocorrelation (SPAC) processing is a useful tool for gaining thickness and shear wave velocity (SWV) of sediments and has been adopted in many previous studies. In this study, the response spectrum of rock site corresponding to the 475-year return period for PMA is defined according to the probabilistic seismic hazard analysis (PSHA) based on the latest ground motion attenuation model of Southwest Western Australia. Site characterization in PMA is performed using two microtremor measurements, namely SPAC technique and H/V method. The clonal selection algorithm (CSA) is introduced to perform direct inversion of SPAC curves to determine the soil profiles of representative PMA sites investigated in this study. Using the simulated bedrock motion as input, the responses of the soil sites are estimated using numerical method based on the shear-wave velocity vs. depth profiles determined from the SPAC technique. The response spectrum of the earthquake ground motion on surface of each site is derived from the numerical results of the site response analysis, and compared with the respective design spectrum defined in the Australian Earthquake Loading Code. The comparison shows that the code spectra are conservative in the short period range, but may slightly underestimate the response spectrum at some long period range.
- 出版日期2009
