A high performance solid oxide fuel cells operating at intermediate temperature with a modified interface between cathode and electrolyte

作者：Fan, Baoan^*; Yan, Jiabao; Shi, Wenping

来源：Journal of the European Ceramic Society, 2010, 30(8): 1803-1808.

DOI：10.1016/j.jeurceramsoc.2010.01.035

• Sintering
• Interface
• Electrical properties
• Solid oxide fuel cells
• Bismuth oxide

By adding 1% Bi(2)O(3) (mol%) into LSCF (La(0.54)Sr(0.44)Co(0.2)Fe(0.8)O(3-delta)), a layer of dense LSCF film is introduced to the upside of yttria stabilized zirconia (YSZ) electrolyte. The dense film increases the interface contact area and reduces the interface ion transfer resistance between cathode and electrolyte remarkably. As a result, the cell performance is greatly elevated from 492 to 901 mW cm(-2) at 650 degrees C. Besides, on the basis of careful observation of the cathode surface by FE-SEM, the function of Bi(2)O(3) to promote the cathode sintering is speculated. The Bi(2)O(3) and the LSCF come into being a kind of eutectic liquid. The eutectic liquid flows down from the cathode bulk to the interface between the cathode and the electrolyte where it accumulates to form a dense layer. This dense layer illuminates the function of adding Bi(2)O(3) into LSCF cathode.

• 出版日期2010-6
• 单位武汉科技大学