科研之友
微信
新浪微博
Facebook
分享链接
摘要
Under the thermal storage strategies in present studies, the power generation unit (PGU) in combined cooling, heating, and power (CCHP) system is turned on/off only based on the state of storage tank; or the operation state of PGU is determined by thermal demand or/and electric demand, which has no relationship with the state of storage tank. For these traditional strategies, either energy demands or state of storage tank is considered for the operation of system. This paper proposes a novel thermal storage strategy (TSS2) for CCHP systems, which determines the operational state of the PGU based upon electric demand, thermal demand and the state of thermal storage device. In this paper, the operation principle of TSS2 is described and compared with the traditional strategies. A hospital in Shanghai was used to evaluate and compared the performance of the system operating under different storage strategies. The results show that TSS2 improves the performance of CCHP system more significantly compared with the traditional strategies. TSS2 can make both PGU and capacity of thermal storage tank be fully used by CCHP system to produce more electric and thermal energy to meet demands of building. Compared with system without thermal storage, the minimum and maximum increase rates of annual total cost saving for traditional strategies are 0% and 14.84%, respectively. However, for TSS2, they can reach 3.79% and 20.22%. Similar conclusions could be achieved for CO2 emission reduction and primary energy saving. The effect of TSS2 on the CCHP system performance is different under different operation strategies.
- 出版日期2017-2
- 单位上海交通大学
