科研之友
微信
新浪微博
Facebook
分享链接
摘要
The catalytic transformation of crude bio-oil into hydrocarbons has been studied on a catalyst prepared based on a modified HZSM-5 zeolite. Previously, the bio-oil has been subjected to stabilization treatments to minimize pyrolytic lignin deposition on the catalyst and to attenuate deactivation. Cofeeding methanol (around 70 wt %) minimizes pyrolytic lignin deposition within and outside the catalyst particles, thereby increasing the viability of crude bio-oil upgrading. Given that the origin of catalyst deactivation is coke deposition within the particles, the nature of this coke has been studied by temperature-programmed oxidation. The coke is made up of (i) thermal coke (pyrolytic lignin formed mainly by polymerization of bio-oil phenolic components) and (ii) catalytic coke (formed in the HZSM-5 zeolite front bio-oil oxygenate compounds by acid sites). These two coke fractions have been quantified, and their combustion kinetics have been determined. Cofeeding methanol contributes to decreasing the content of both types of coke. but mainly thermal coke, and so catalyst deactivation is lower. The activation energy for thermal coke combustion (E-1) is more than twice that corresponding to catalytic coke combustion (E-2), whereas the kinetic constant at 550 degrees C (k(1)*) is an order of magnitude higher than that for the catalytic coke (k(2)*). This is attributed to the latter's location in the HZSM-5 zeolite micropores. The combustion kinetic parameters for both types of coke are dependent on methanol content in the feed.
- 出版日期2009-8
