An Evaluation of Creep-Fatigue Damage for the Prototype Process Heat Exchanger of the NHDD Plant

作者：Lee Hyeong Yeon^*; Song Kee Nam; Kim Yong Wan; Hong Sung Deok; Park Hong Yune

来源：Journal of Pressure Vessel Technology-Transactions of the ASME, 2011, 133(5): 051208.

DOI：10.1115/1.4003466

• process heat exchanger
• creep-fatigue
• damage
• Alloy 617
• draft code case for Alloy 617
• high temperature design code

A process heat exchanger (PHE) transfers the heat generated from a nuclear reactor to a sulfur-iodine hydrogen production system in the Nuclear Hydrogen Development and Demonstration, and was subjected to very high temperature up to 950 degrees C. An evaluation of creep-fatigue damage, for a prototype PHE, has been carried out from finite element analysis with the full three dimensional model of the PHE. The inlet temperature in the primary side of the PHE was 950 degrees C with an internal pressure of 7 MPa, while the inlet temperature in the secondary side of the PHE is 500 degrees C with internal pressure of 4 MPa. The candidate materials of the PHE were Alloy 617 and Hastelloy X. In this study, only the Alloy 617 was considered because the high temperature design code is available only for Alloy 617. Using the full 3D finite element analysis on the PHE model, creep-fatigue damage evaluation at very high temperature was carried out, according to the ASME Draft Code Case for Alloy 617, and technical issues in the Draft Code Case were raised. [DOI: 10.1115/1.4003466]

• 出版日期2011-10