Diosgenin-selective molecularly imprinted pearls prepared by wet phase inversion

作者：Dima Stefan Ovidiu^*; Meouche Walid; Dobre Tanase; Nicolescu Tanta Verona; Sarbu Andrei

来源：Reactive and Functional Polymers, 2013, 73(9): 1188-1197.

DOI：10.1016/j.reactfunctpolym.2013.05.014

• Molecularly imprinted polymers
• Diosgenin
• Phase inversion
• Acrylic copolymers
• MIPs

Functional poly(acrylonitrile-co-acrylic acid) imprinted pearls, selective for diosgenin - a steroidal saponin with the ability to reduce cholesterol from blood - were prepared by wet phase inversion. Three copolymers with the monomer ratios AN:AA90:10, 80:20, and 70:30 where used to prepare the corresponding MIPs (molecularly imprinted polymers) and NIPs (non-imprinted polymers).The rheology studies showed that an 8 w% solution of copolymer in dimethylformamide lead fastest to robust, spherical pearls. Affinity centres were generated via non-covalent bonding between diosgenin's hydroxyl groups and carboxyl moieties of the copolymer matrix. The presence and the quality of the selective binding sites in MIPs were highlighted by optic and electronic microscopy, infrared spectroscopy, thermal analyses, and batch rebinding tests. The imprinting factor (IF) values, ranging from 1.9 to 4.35, decrease with the increasing of the initial concentration of feed solution. When comparing the MIPs concerning the AN:AA ratio, the IF decreases in the order AN:AA80:20 > AN:AA70:30 > AN:AA90:10, suggesting that the 80:20 ratio is the optimum compromise between selectivity (given by AA) and resistance (given by AN). For the best imprinted MIP, 80:20, affinity tests were performed with three competitors, obtaining the average affinity 54%, compared with 31%, 11%, and 4% for the competitors.

• 出版日期2013-9