Amino Functionalization of MWNTs and Their Effect on ILSS of Hybrid Nanocomposites

作者：Chandrasekaran V C S; Santare M H; Krishnan P; Advani S G^*

来源：Composite Interfaces, 2011, 18(4): 339-355.

DOI：10.1163/092764411X584478

• Surface modification
• vacuum assisted resin transfer molding (VARTM)
• compression shear test (CST)
• hybrid composites

Multi-walled carbon nanotubes (MWNT) were oxidized by treatment with a mixture of sulfuric and nitric acids to introduce carboxyl groups on their surfaces. Triethylene tetraamine ( TETA) was then grafted onto the oxidized MWNTs via a thionyl chloride route to obtain the amino-functionalized MWNTs (f-MWNT). The presence of amino functional groups on the MWNTs was confirmed using FT-IR, and scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to compare the morphology of pristine MWNT (p-MWNT) and f-MWNT. Both the p-MWNT and f-MWNT were dispersed in epoxy resin using ultrasonic agitation and the suspensions were injected into E-glass fiber woven fabric using a specialized vacuum assisted resin transfer molding (VARTM) process in which a flow flooding chamber (FFC) was used to re-direct the suspension flow. Control samples were fabricated using the same E-glass fiber mat and unmodified epoxy resin following the same procedure. Compression shear testing (CST) was performed on all the manufactured samples to determine their Inter laminar shear strength (ILSS). Results show 41% increase in ILSS for hybrid composites containing p-MWNTs and a 61% increase for samples containing f-MWNTs relative to the control samples without MWCNT.

• 出版日期2011