Anatase formation on titanium by two-step thermal oxidation

作者：Okazumi Takuro; Ueda Kyosuke; Tajima Kazuki; Umetsu Nobuyuki; Narushima Takayuki^*

来源：Journal of Materials Science, 2011, 46(9): 2998-3005.

DOI：10.1007/s10853-010-5177-x

Two-step thermal oxidation of commercially pure Ti was investigated with a focus on the formation of anatase. A first-step treatment was conducted in Ar-(0.1-20)%CO atmosphere at a temperature of 773-1173 K for a holding time of 0 or 86.4 ks, and a subsequent second-step treatment was conducted in air at 473-873 K for 0-86.4 ks. Titanium oxides and titanium oxycarbide were obtained in the first step, with relative amounts depending on heating temperature, holding time, and CO partial pressure. An anatase-rich layer on Ti was obtained after second-step treatment in air at 573-773 K in cases where single-phase titanium oxycarbide formed in the first step. Thus, the formation of single-phase titanium oxycarbide in the first step and temperature control in the second step were required for the formation of an anatase-rich layer. The bonding strength of an anatase-rich layer with a thickness of 0.5 mu m was calculated to be around 90 MPa. This study reveals the conditions under which an anatase-rich layer with excellent adherence to Ti can be prepared by thermal oxidation.

• 出版日期2011-5