Achievement of high yield strength and strain hardening rate by forming fine ferrite and dislocation substructures in duplex lightweight steel

作者：Song Hyejin; Yoo Jisung; Sohn Seok Su^*; Koo Minseo; Lee Sunghak

来源：Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2017, 704: 287-291.

DOI：10.1016/j.msea.2017.08.030

• Lightweight steels
• Dislocation substructures
• Strain hardening

Lightweight steels containing a considerable content of Al show high specific strength and ductility, but there are some drawbacks such as low yield strength and stringer-type bands formed along the rolling direction. Here we design new duplex lightweight steel in order to complement the drawbacks, and achieve ultra-high yield strength (865 MPa), good ductility (41%). Submicron ferrite mainly affects high yield-to-tensile ratio, and high strain hardening is attributed to Lomer-Cottrell lock and planar slip, and cell structure by further deformation in austenite. These results are expected to provide a desirable possibility for applications to reinforcement components requiring high yield-to-tensile ratio.

• 出版日期2017-9-17