科研之友
微信
新浪微博
Facebook
分享链接
摘要
The current paper presents a simplified approach which allows the CFD simulation of Refuse Derived Fuel (RDF) combustion. The starting point is the subdivision of a real RDF into characteristic fuel fractions by sorting. Each of the fractions was analyzed concerning elemental composition, heating value, proximate analysis as well as size and shape. The flight behavior of the RDF fractions has been characterized in a drop-shaft. A stereoscopic camera system was used to derive drag and lift coefficients. In addition, a single particle combustion reactor has been used to measure the duration of the relevant combustion phases like volatile combustion or char burn-out. A model calculating the particle trajectories based on the measured drag and lift frequency distributions has been developed. For combustion modelling the RDF has been subdivided into devolatilizing and char forming fractions and into fractions which are converting through a melting and decomposition process. For both types of materials combustion models have been formulated. Intra particle temperature gradients are accounted for. A change of particle shape during combustion is considered using sphericity as a model parameter. The models have finally been introduced into FLUENT by user defined functions. Comparison with drop-shaft measurements and a single particle combustion reactor show that the models forinulated can statistically describe the motion and conversion behaviour of RDF with sufficient accuracy. As an example of application, the models were finally used for the CFD simulation of the furnaces of a 612 MW(e) RDF co-fired coal power plant. The results indicate an overall slower reaction rate of RDF compared to coal, resulting in a total conversion of RDF of 83%.
- 出版日期2017-7-15
